HS-200 Epoxy Anchoring Gel is a two component (2:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system. HS-200 has a long working time (20 minutes at 75° F), while providing an anchor that can be loaded in as little as 4 hours. HS-200 has been tested in accordance with ICC - AC58 and is acceptable for long term tensile loads. It may also be used for short term tensile load anchors, which includes wind and seismic forces.

General Uses

• Anchoring threaded rod, bolts, rebar and smooth dowels into concrete, grout filled block, and unreinforced masonry.
• Seismic anchoring and bracing
• Grouting dowel bars and tie bars for full-depth concrete pavement repairs

Advantages and Features

• High strength
• Moisture insensitive
• Non-sag epoxy system