|
|
| |
Hard Rok
Fast Anchoring Cement
|
|
| |
|
HARD-ROK Anchoring cement is a high strength, fast setting, non-shrink, nonmetallic cementitious product used for anchoring and grouting applications. This hydraulic cement is quickly and easily mixed with water to either a pourable or putty-like consistency. HARD-ROK is specifically formulated for anchoring threaded rods, bolts, rebar, railings, signs, posts, parking meters, & machinery in concrete, brick, stone and other substrates. It is effective for patching holes and cracks in concrete floors, masonry walls, roads and sidewalks and for repointing mortar joints
General Uses
- Anchoring Threaded Rods, Bolts and Rebar Dowels
- Anchoring Railing, Signs, Posts and Parking Meters
- Anchoring Machinery
- Patching Holes and Cracks in Concrete
Advantages and Features
- High Strength
- Fast cure anchoring cement: fast initial set of 15 minutes at 75°F when mixed to fluid consistency eliminates wasteful downtime
- Ideal for interior and exterior applications
- Contains no metals to rust and cause unsightly stains
- Compressive strength of 7,200 psi in 28 days insures a firm bed in grouting applications
- Mixed to a free flowing consistency: Flows like pancake batter eliminating the labor required in Roding or vibrating to eliminate voids.
- Mixed to a putty-like consistency: May be troweled into areas where minimal slump is desired insuring optimum performance in horizontal or vertical applications.
- Use less than competing products: Drill hole only 1/4” diameter larger than object to be installed.
- Withstands water erosion and when submerged in water provides performance similar to high quality concrete.
Only water needs to be added eliminating longer mixing times, additional training and jobsite inventory often associated with other products requiring additional additives.
|
|
|
|
|
| |
|
| |
|
|
| Data Sheets |
TDS
|
 |
MSDS
|
|
|
|
|
|
